Industrial Transmitters

Eectronet series CT / TDS TX 22 are Conductivity Transmitters designed for fast, easy and trouble free start up. These are ideal for measuring the concentration of dissolved solids in water. They are provided with an accurate pre-determined factory calibration constants. Rugged design and corrosion resistant material keep electrode spacing and surface area constant so cell constant remain stable for long period. Durability of material and high resistance to corrosion ensure the long life and require low maintenance.

Suitable for normal drinking / raw water

Built in Temperature Compensation

Communication Output : R S485 (MODBUS RTU)

Available with 0.01 / 0.1 / 1 Cell Constants

Suitable for online conductivity / TDS measurement

Cell With Transmitter

System Accuracy +/-2% F. S.

Output : 4 to 20 mA 

Electronet series ELPRT-100SDP micro-controller based design which has capacitive type pressure sensing element.

ELPRT100ELPRT-100SDP is suitable for Differential Pressure measurements. It is used for various industrial applications. It can be used for

ELiquid,Gas & Vapor pressure measurements. It is having wide ranges of pressure with high accuracy & linearity output in the form 

of electrical signal 4-20 mA DC with HART communication.

Key Features;

Capacitive Sensor with Diaphragm

ATEX Certified

Rigid Construction

Two Wire System

Range-ability 100:1

LCD Display

Application flexibility with HART Communication

Non-Intrusive Magnetic Controls 

Electronet series PT-22SD & DPT-22SD are Pressure Transmitter for fast, easy & trouble free operation. These transmitters are E designed to cover the majority of industrial applications such as clear Gases & Liquids. Electrical output is in the form of 4-20 mA DC / 0 to 5V DC proportional to the Input Pressure. PNP (100mA max.) alarm output is also available. All wetted parts are stainless steel & hermitically welded. 

Key features;

Measuring range -0 to 250 Bar

Media : Liquid & Gases

Accuracy : < ± 0.1 of range

Response Time : < 1 Sec.

Long Term Stability 

Robust design for use in harsh industrial environments

High voltage & reverse polarity protection

Electronet series Elprt-100spt (gp and ap) can accurately measure the pressure of gases,vapors and liquids used in refineries, petrochemicals, oil and gas,power, chemical industries, food processing and pharmaceutical industries.

based on a mechanical and rugged silicon sensor and capacitive sensor, the elprt-100s(gp and ap) is suitable for absolute and gauge pressure measurements.

it is having wide ranges of pressure with high accuracy and linearity output in the form of electrical signal 4-20 ma dc with hart communication.

Key Features:

Piezo Resistive & Capacitive Sensor

Long Operational Life

Excellent Long Term Stability

Two Wire System Range-ability

100:1 LCD Display with Backlight

Faster Response Time

Application flexibility with HART Communication 

Eectronet series ULT-200 is a 2 wire Ultrasonic Level Transmitters specially designed for non-contact type level measurement. Ultrasonic level measurement is based on the transit time technology which calculates the time required by ultrasonic pulses to travel from sensor & surface of liquid & back to sensor. Ultrasonic level transmitters are the best for applications such as slurries, corrosive liquids & waste water without obstacle throughout the beam. The transmitter provides 4-20 mA DC continuous output with local indication through LCD. The measuring range is available up to 20 mtrs.

Key Features;

Non-contact type

Compact size & Easy Maintenance

2 wire direct current loop powered

Process down time minimized

Automatic Temperature Compensation

Measures liquid height, distance to liquid

volume or flow in open channels

Display: LCD

Password Protection

Software calibration

Easy to Install & Configure

Narrow Beam Technology 

 Electronet series PH-100S are PH / ORP transmitters used for various industrial applications. It can accept input from pH / ORP electrode & pH / ORP signal is transmitted in the form of electrical 4 - 20 mA signal. The on-line pH / ORP indication is provided through  LCD. Span / Zero adjustments are easily accessibly. These transmitters are suitable for any make of electrode.

Electronet series PT-22 are Digital Pressure Transmitter for fast, easy & trouble free operation. These transmitters are designed to cover the majority of industrial applications such as clear Gases & Liquids. Electrical output is in the form of 4-20 mA DC proportional to the Input Pressure. All wetted parts are stainless steel & hermitically welded. 

Key Features;

Piezo Resistive Sensor

Measuring Range -1 to 700 Bar

Handy & Maintenance Free

Reliable & Cost Effective

Ingress Protection IP 65

Also available with Display

Eectronet Series TT-04H are temperature transmitters used for various industrial applications. It can accept input from RTD, all types of thermocouples & temperature signal is transmitted in the form of electrical 4 - 20 mA signal. The on-line temperature indication is provided through LCD. Span / Zero adjustments are easily accessible.

Key Features;

4-20 mA HART Compatible

Single & Dual Sensor Inputs

Differential, Average & Redundant temperature measurement

MOC Electronics Enclosure : Die Cast Aluminum / S S316

Enhanced display with Local Operator Interface

Sensor Redundancy / Peak Value Measurement / ?T Measurement / Average

ATEX Certified