LCS 02 Industrial Conductivity Level Transmitter

Features

• Switch output with potential-free relay contact

• Simple, low-cost & reliable operation

• Electronics protection class: Weatherproof IP67

• Trouble-free operation for conductive / non-conductive liquids and slurries

Electronet series LCS-02 are conductivity-type level switches used for level measurement of conductive liquids.
The probe works on the principle of variation in electrical resistance between the reference electrode and the level control electrode.

When the medium covers the electrodes, the change in resistance is detected as a level signal.

• If the tank wall is electrically conductive, it can serve as the reference electrode.

• For tanks made of plastic, concrete, or other non-conductive materials, an additional reference electrode is required.

Technical Specifications Type

1. Single Point Conductivity Type Level Switch

2. Two Point Conductivity Type Level Switch

3. Three Point Conductivity Type Level Switch

4. Four Point Conductivity Type Level Switch

Probe Length

• As per requirement (Rigid type, max 3000 mm)

Probe Diameter

• 15 mm to 25 mm

Process Temperature

• Up to 120°C (max)

Process Pressure

• Up to 10 kg/cm² (max)

Probe Material (MOC)

• SS316 / SS316L

Type of Sensing Electrode

• Rigid Type

• Flexible Type

Electrode Insulation Material

• PTFE

Electronics Enclosure (MOC)

1. Die-cast Aluminium

2. SS304

Seals / Gaskets

• EPDM / PEEK

Electrical Connection

• DIN 43650 Connector

Type of Output

• Resistance Value

Accuracy

• ±5 mm with respect to set point

Repeatability

• ±1 mm with respect to set point

Response Time

• < 1 second

Switch Differential

• Fixed ±10 mm

Probe Type

1. Single Rod

2. Coaxial

Enclosure Protection Class

1. SS Enclosure: IP65 or higher (as per IEC-60529)

2. Die-cast Aluminium Enclosure: Weatherproof IP67

Process Connection

1. ½" BSP(M)

2. 1¼" BSP(M)

3. 2" PVC Flanged

4. 2" SS316 Flanged

5. M20 x 1.5 (M)

6. M39 x 3 (M)

Mounting

• Tank Mounted

• Mounted over open sumps

Ambient Conditions

• Temperature: 0 to 75°C

• Humidity: 0 to 98% non-condensing at 35°C